About
Contacts
Feedback
Programs and Tutorials
Utilities
DSP Applications
EM Applications
Rect.Waveguides
Microstrip Antennas
Microwave Filters
Lange Coupler
Branchline Coupler
Directional Coupler
180 Deg.Hybrid C.
Mw. Power Dividers
Propagation
Downloads
Links
Site Map

The equal power division concept is dividing input power to equal or more than two ways equally. The mostly used one is the three port network equal two way divider. It is also called 3 dB power divider.

In this type of dividers, there are four different sections.

1-) Input port

2-) Quarter-wave transformers

3-) Isolation resistors

4-) Output ports  

    Input and output ports are identical and the value of the impedances of them are Zo.

    Quarter-wave transformer parts are called as quarter-wave transformer because of the length of these parts. The length of these parts are equal to the one fourth of the wavelength of the electromagnetic wave, which is propagating in this three port network. This length is also related to the operation frequency.

                Wavelength * Frequency = Phase velocity (Usually the speed of light)

    Why the quarter-wave transformers are used in the circuit? The reason for this leads us to understand the matching conditions for this network. Matching of the output ports is necessary for the better power transfer from input to output, because if the output ports are matched, the reflected power from the network when we input some amount of power is zero. This means, there is no reflection from the outputs and all of the power is transmitted to the output ports. Consider the case of inputing power at port 1 and terminate the ports 2 and 3 with the reference loads.

Then the reflected power for inputing power at port-1 is zero ( S11 = 0 ). All the power is transferred at that frequency. The quarter-wave transformer part leads to the matched ports.

    Isolation resistor is to isolate the output ports. If there is a coupling effect between output ports or in other words, the power comes from one output port has an effect on other output port, the perfect division of the power cannot be possible. This isolation resistor avoids the coupling effects of the output ports.

    Output ports are the ports that divided power comes to. These ports have the same impedance value with the input port's impedance.

    To analyze the Wilkinson power divider, even-odd mode analysis method is used. In even-odd mode analysis the aim is finding the S-parameters of the divider. S-parameters give all voltage and power information about the network we consider. To find S-parameters, from the definition of them, we should input power at a port and measure the contributions of that power to the other ports. In even-odd mode analysis, the superposition of the two modes is inputing power at port-2 and finding the effects at all ports. First of all our circuit becomes symmetric, made symmetric with respect to the axis at the middle. This symmetricity makes the analyze easy.